Shop headings: New Spares | Used Spares | Accessories | Brands
A2 stainless socket cap button head screw M6 x 10
Can be used in place of GU98210612
More than 5 in stock
98370612 GU98370612 98 37 06 12
9837 0612 9837.0612 98.37.06.12
£0.80
INC VAT
£0.67 EX VAT
Front wheel bearing, sealed
2 bearings required per wheel, Also used as rear wheel bearing on V7 850
More than 5 in stock
92204221 GU92204221 92 20 42 21
9220 4221 9220.4221 92.20.42.21
£10.80
INC VAT
£9.00 EX VAT
Split mudguard grommet for tail light mount
More than 5 in stock
91551099 GU91551099 91 55 10 99
9155 1099 9155.1099 91.55.10.99
£2.40
INC VAT
£2.00 EX VAT
Brembo brake master cylinder overhaul kit for overhauling foot operated PS 15 master cylinders on linked systems. Includes all seals and brake grease
This seal kit replaces Guzzi part numbers 17659350, 66139790. Brembo ref. 110273920. This repair kit also used on some Cagiva 650 Elefant models and Benelli Sei. Some Nevada 750 models use BRA14701, check your rear master cylinder before ordering. See this link for help with fitting this kit. Supercedes front kit BRA11043
Note that this kit is only for PS15 models where the piston is retained by a ring, if your master cylinder has a circlip retaining the piston then you have a PS 16 and you will need to replace the whole master cylinder - see BRA19001 for a replacement
More than 5 in stock
10273920 GU10273920 10 27 39 20
1027 3920 1027.3920 10.27.39.20
Also fits Benelli Sei, Cagiva Elefant, Ducati 600 SL Pantah, Ducati 750/900 SS, Ducati 860/900 GTS, Ducati 900 Darmah, Ducati 900 MHR, Ducati 1000 MHR, Ducati 750 Sport (1972-1974), Laverda Jota
£26.00
INC VAT
£21.67 EX VAT
Brembo brake caliper rebuild kit for one P2 F08 (P8) caliper, contains 2 pairs of seals, O ring and 2 M10 bolts
This seal kit is for F08 calipers fitted to front of all these models. Also used on some Triumph Bonnevilles, MZs, Ducati 600 Pantah, 500 Pantah, 500 Sport Desmo, 500 GTV, 650 SL, 750 F1, 750 F1B, 750 Paso, 750 Sport, 900 MHR, 900 SS, 900 S2, 906 Paso, 100 R1, 100 S2 Desmo, Laverda Jota 1000 and Laverda 1200 Anniversary. Brembo ref. 120274110
See BRA10310 for less expensive replica kit
More than 5 in stock
14659000 GU14659000 14 65 90 00
1465 9000 1465.9000 14.65.90.00
Also fits Benelli 354, Benelli Sei, Ducati 250/350/450 Desmo (-1976), Ducati Pantah, Ducati F1, Ducati 750 Paso (1987-1990), Ducati 750 Sport (1988-1990), Ducati 860 GT/GTS, Ducati 900 GTS, Ducati Hailwood Rep, Ducati 900 Darmah (1977-1978), Ducati 906 Paso (1988-1989), Ducati 1000 R1 Hailwood Ref., Hesketh, Horex HRD 600, Horex 500/600 Columbus, Laverda 750 SF2, Laverda 750 SFC, Laverda 750 SF3, Laverda 1000 3C (1974-1978), Laverda 1000 3CL (1976-1981), Laverda 1000 RGS/RGA, Laverda 1000 SFC, Laverda 1200 (1978-1979), Laverda 1200 TS/Mirage (1981), MZ ETZ 125/150/250/300 (1985-1992), Norton Classic (1989), Norton Interpol (1989), Triumph T140 (1985-1988 Brembo)
£29.00
INC VAT
£24.17 EX VAT
99cm length of black pipe with clips for connecting rear master cylinder to brake fluid reservoir
Brake fluid, oil and fuel resistant. This is long enough for the rear brake master cylinder on V50 II and V35 I
More than 5 in stock
£12.00
INC VAT
£10.00 EX VAT
Rubber grommet for clutch bell housing / flywheel timing hole
Timing hole plug or timing hole bung. Also used to fill holes used to mount Griso factory luggage rack
More than 5 in stock
93180220-z 93180220 GU93180220 93 18 02 20
9318 0220 9318.0220 93.18.02.20
£1.60
INC VAT
£1.33 EX VAT
Flanged zinc plated nyloc M6 nut
More than 5 in stock
92660007 GU92660007 92 66 00 07
9266 0007 9266.0007 92.66.00.07
£0.50
INC VAT
£0.42 EX VAT
Swing arm taper roller bearing
2 races required per bike, supercedes unsealed bearing Guzzi ref. 92249217 and 92249216. See TRA90434 for oil seals
More than 5 in stock
92249213 GU92249213 92 24 92 13
9224 9213 9224.9213 92.24.92.13
£18.80
INC VAT
£15.67 EX VAT
Rubber plug for swing arm pivot locknut
More than 5 in stock
93180105 GU93180105 93 18 01 05
9318 0105 9318.0105 93.18.01.05
£1.20
INC VAT
£1.00 EX VAT